Deer European Euro Skull Mount Display, Wall Pedestal, Solid Wood

Choose from Light oak, Dark Oak, Light Cherry, Dark Cherry, Walnut, White Ash or Pine shown and labeled in the photos. Completely assembled minus the Trophy Simple instruction listed below, it will take longer to find a screw driver, drill and drill bit then it will take to mount. Each plaque comes with a keyhole bracket on the back for hanging. These mounts are 100% Hand Crafted in the USA and made from 100% solid wood grown in the USA. Slight variations in color and grain patterns can be expected between plaques due to the nature of solid wood. Please take note of the different pictures, under each color/wood with different backgrounds. The appearance of color changes as the background changes. Finish coats are polyurethane Plaques measure approx. 6" x 14" Trophy is not included Instruction to mount are really simple and are as follows. 1. Place a piece of paper on the face of the mount (this will avoid the teeth from marking up the plaque) than Place your trophy on the mount that you planning on mounting. Take note to the pre-drilled hole in the mount and decide where you want to position your trophy. 2. Drill a 1/8” hole corresponding to the predrilled hole on the bottom side of your trophy. 3. Screw the 2.5” screw supplied from the back of the mount through the front and into the hole you drilled in your trophy. 4. Make sure the head of the screw is past the edge of the wood.