Tenino Copper Naphthenate 17% (2% as Metal) Double Strength - Highest Concentration Allowed - 1 Gallon - Wood Preservative (Pack of 2)

Tenino Copper Naphthenate EPA Reg. No. 64405-22-54471 Always read and follow all label directions. For Exterior Use Only! Tenino Copper Naphthenate contains 2% copper as metal as an oil-borne solution, labeled for General Use. This ready-to-use solution in sturdy one gallon resealable jug provides coverage of 100 - 300sq ft., requires no mixing or dilution and may be applied by brush to almost any wood product needing protected from the elements. Treated wood will be protected from infestation of destroying organisms including subterranean termites, drywood termites, wood destroying beetles, powderpost beetles, carpenter ants and decay fungi. It may also be used to protect and prevent warping, swelling, shrinking, and end checking caused by changes in moisture content of wood products, rot, mold, mildew and moss. Tenino can be used for remedial or preventive treatment of standing wooden poles, piling and other existing structures wooden and cellulose utility and construction products including: lumber end cuts timber rail ties posts poles freeway fencing siding boats piers docks boxes roofs shakes cedar shake roofs shingles porches steps fences rails beverage cases Tenino treated wood is suitable for ornamental or planting landscape timbers, ties, wooden seedling trays, outdoor decor, flower boxes and window boxes. Tenino meets the AWPA Standard M4 end-cut requirements for exterior and ground contact field treatments and should be used to fulfill requirements in IBC 2303.1.9, and IRC R317.1.1 whenever pressure treated lumber is cut, or drilled. Tenino is best used to supplement pressure-treated preservative wood protection in aggressive hazard class environments envisioned in AWPA Use Category 4,4B,4C.

• The information below is per-pack only
• Ready-to-Use Copper Naphthenate 17% (contains 2% copper as metal), meets the AWPA M4 Standard
• Required by building codes (IBC 2303.1.9 & IRC R317.1.1) on end-cuts of all pressure treated lumber
• Low VOC (<350g/L) and 100% domestically sourced from recycled copper and reclaimed by-products.
• Labeled for General Use, and wood treated with Tenino maybe discarded in local landfill
• Water repellant and both toxic and repellant to termites and other wood destroying insect